|
SPECIFICATION
|
|
|
|
Measurement Range: |
2% to 6% of concrete. 0 to 10 gypsum floor screed
|
|
|
|
|
|
Power Supply: |
9v battery
|
|
|
|
USERS/USES
The CME 4 Concrete Moisture Encounter is used in the flooring & other industries where it is important to know the moisture content of concrete before a coating or covering is applied
FEATURES
On the new CME 4 Concrete Encounter some of the features are as follows....
Two simple push button controls, ON & HOLD
Concrete moisture readings, 0% to 6%,are displayed on a clear easy to read moving coil meter with linear scale
Comparative or qualitative readings for gypsum & othe floor screeds are shown on a 0 to 10 scale
A reference scale of 0 to 100 is also provided
To conserve battery life,the instrument automatically powers off after 4 minutes of inactivity
Power remains on if a change in meter reading is detected or any other button is pressed
An audio alert will sound 10 seconds prior to the meter automatically powering off
Two LED indicators
The lower LED illuminates when the ON button is pressed & remains on untill the CME 4 automatically powers off
The upper LED flashes when HOLD is selected
If the batttery is nearing the end of is useful life,both LEDs flash sequentially for 3 seconds at each power ON to indicate that the battery should be replaced
HOLD button freezes needle on moving coil meter to facilitate ease of recording readings
If HOLD was selected prior to the CME 4 automatically powering off,the frozen meter reading is digitally memorized & restored next time ON is selected.
|